Specifications
- Image chip type: Monochrome
- Light spot size [mm]: 2 x 5
- Explanation of light spot size: une distance de 150 mm
- Switching frequency ≤ [Hz]: ≤ 100
- Light source: LED
- Light color: Red
- Wavelength [nm]: 625
- LED risk category [RG]:
- Explanation of risk category: Nach EN 62471
- Projector laser: Laser red (635 nm), Class 2 (IEC 60825-1)
- Resolution: HDV2
- Number of pixels (H x V) [px]: 1440 x 1080
- Imaging chip technology: CMOS
- Sensor size ["]: 1/2.9
- Pixel size [碌m]: 3.45
- Field of view type: Medium
- Focal length [mm]: 12.0
- Opening angle [掳]: 24.0
- Min. field of view (X x Y) [mm]: 10 x 8
- Aperture number: 2.8
- Depth of field: Standard
- Focus drive: Motorized
- Target laser: Laser rot (655 nm)
- Laser class: 1 (IEC 60825-1)
- Network protocol: TCP/IP, Profinet, EtherNet/IP, sFTP, SMB, FTP, Service Port
- Max. number of jobs: 255
- Max. number of detectors: 255
- Alignment: Contour comparison, Pattern matching, Edge detection
- Available detectors: Pattern matching, Contour, Contour (3D), BLOB, Target mark (3D), Data code, advanced, Barcode, advanced, OCR, Brightness, Contrast, Gray level, Caliper, Distance
- Result processing: Text, Numbers, Robotics
- Pre-processing: Arrangement, Filter
- Calibration: Board (measurement), Board (robotics), Hand-Eye (robotics), Base-Eye (robotics), Scaling (measurement), Point pair list (robotics)
- Robotic functions: Gripper clearance check, Result offset, image coordinates, Result offset 2D, Result offset 3D
- Additional functions: Archiving, Image transmission, individual overlays, Multiple image acquisition, Multiple detection for contour and pattern matching detector, Multiple detection for detector contour (3D), Job checksum, Conditional executions
- Available detectors: Pattern matching, Contour, Contour (3D), BLOB, Target mark (3D), Data code, Barcode, OCR, Brightness, Contrast, Gray level, Caliper
- Hardware: VISOR
- Warm-up time [Min.]: 20
- Temperature profile [mm/K]: 0.01
- Typical current draw [mA]: 350
- Type of voltage source: The device must be supplied by a "Class 2" power supply unit.
- Readiness delay [ms]: ≤ 16,000
- Reverse polarity protection: Yes
- Overvoltage protection: No
- Residual ripple [%]: ≤ 5 Vss, level 3
- Explanation of residual ripple: EN 61000-4-17
- Polarity: PNP/NPN
- Short circuit protection: Yes
- Input threshold (High): > UB-1V
- Input threshold (Low): < 3V
- Input resistance [k惟]: > 20
- Max. output current [mA]: 50
- Explanation of max. output current: max. 100 mA on pin 12
- Inductive loads: Typ.: Relay 17 K / 2 H, pneumatic valve 1.4 K / 190 mH
- Max. output current (total) [mA]: 200
- Ethernet transmission rate [Mbit/s]: 100
- Number of switchable IOs: 6
- Number of outputs: 2
- Number of inputs: 2
- Encoder functions: Yes
- Height [mm]: 85.0
- Length [mm]: 45.0
- Width [mm]: 76.4
- Weight [g]: 490
- Front panel material: PMMA
- Housing material: Aluminum (cast)
- Connection name: Supply
- - Number of pins: 12
- - Coding: A
- - Thread: M12x1
- - Material: Metal
- - Type: Plug
- Connection name: LAN
- - Number of pins: 4
- - Coding: D
- - Thread: M12x1
- - Material: Metal
- - Type: Socket
- Explanation of ambient temperature: storage: < 95 % humidity, non-condensing
- Protection class: IP 65, IP 67
- Explanation of protection class: For C-mount devices, only in combination with protective tube
- Explanation of protection class: For C-mount devices, only in combination with protective tube
- Vibration and shock resistance: EN 60068-2-6, EN 60068-2-27
- Height [mm]: 85.0
- Length [mm]: 45.0
- Width [mm]: 45.0
- Weight [g]: 220
- Front panel material: PMMA
- Housing material: Aluminum (cast)
- Explanation of ambient temperature: storage: < 95 % humidity, non-condensing
- Protection class: IP 65, IP 67
- Explanation of protection class: For C-mount devices, only in combination with protective tube
- Explanation of protection class: For C-mount devices, only in combination with protective tube
- Vibration and shock resistance: EN 60068-2-6, EN 60068-2-27
Description
Short description:
VISOR® V20 Robotic +Z, Professional, 255 jobs each with 255 detectors, red illumination, medium field of view, motorized focus, LAN interface, target laser, distance measurement range 150…2500 mm
Description
Applications
- Detecting objects
- Measurement
- Identify
- Positioning
255 jobs with 255 detectors each
- Alignment: X/Y and orientation
- Pattern matching, contours, contour 3D, target mark 3D: Teach-in and detection of patterns, contours and 3D poses
- Caliper: Distance between edges
- BLOB, gray threshold, brightness: Evaluation of brightness
- Contrast: Evaluation of the contrast
- Barcode: Reading 1D barcodes, EAN, UPC, RSS, 2/5 Interleaved, 2/5 Industrial, Code 32, Code 39, Code 93, Code 128, GS1, Pharmacode, Codabar
- Datacode: Reading 2D codes ECC200, QR-Code, PDF 417, ECC200 GS1
- OCR: Reading fonts
- Result processing:Text, Math: Monitoring and calculating detector results
More detail about ELITE SENSOR SYSTEM SDN BHD
Malaysia
