This iconic threadlocker locks and seals metal nuts and bolts to prevent loosening due to shock and vibration. Medium-strength: removable with hand tools.
LOCTITE® 243 is a blue, general purpose threadlocker that provides a medium-strength bond. It works on all metals without primer, including passive substrates such as stainless steel, aluminum, and plated surfaces. Suitable for use on most oil-coated, 'as-received' fasteners without cleaning.
| Application method | Dispense gun, Dispense system, Manual |
| Application temperature | -55.0 - 180.0 °C (-65.0 - 360.0 °F ) |
| Applications | Threadlocking |
| Breakaway torque, M10 Steel Nuts/Bolts | ~26.0 N·m (230.0 in./lb. ) |
| Color | Blue |
| Cure type | Anaerobic cure |
| Fixture time | 10.0 min. |
| Key characteristics | Disassembly: removable, Fluorescent, General purpose, Oil tolerant, Primerless, Strength: medium strength, Thixotropic |
| Physical form | Liquid |
| Prevail torque, M10 Steel Nuts/Bolts | 5.0 N·m (40.0 in./lb. ) |
| Recommended for use with | Metal, Metal: passive metal |
| Specific gravity, @ 23.0 °C | 1.08 |
| Viscosity, Speed 20 RPM | 2150.0 mPa·s (cP) |
It is recommended to use LOCTITE® SF 7063, SF 7064, or SF 7070 to degrease and clean surfaces prior to applying threadlocker adhesive.
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7240 or LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).
Apply liquid threadlocker to the engagement area. For manual dispensing, the use of a peristaltic handgun or the LOCTITE® Pro Pump is recommended to ensure a consistent application volume.
Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.
Apply several drops of liquid threadlocker down the sides of the blind hole filling the lower third. Apply several drops to the bolt.
Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.
Disassemble with standard hand tools.
More detail about Bosscrew Fasteners Sdn Bhd
Malaysia
