The OPTITEMP TCA-TS54 is a threaded thermocouple (TC) assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-TS54 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
Depending on selected device configuration
| Product type | Temperature assembly |
| Product family name | OPTITEMP |
| Product positioning | For higher flow velocities and pressures |
| Product variants |
|
| Measurement variables | Temperature |
| Measurement principle | Thermocouple (TC) |
| Measured media | Liquids, Gases, Steam |
| Assembly with thermowell | Yes |
| Temperature assembly design | ASME-style |
| Thermowell type | Barstock |
| Sensor mounting | Screw-in |
| Measuring insert replaceable | Yes |
| Measuring insert type | Replaceable spring loaded mineral isolated measuring insert OPTITEMP TC 100 |
| Tolerance class (according to DIN EN 60584) | 1 |
| Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
| Thermocouple (TC) configuration | 1 x Type J, 1 x Type K, 2 x Type J, 2 x Type K |
| Thermowell diameters | Ø16 mm / 0.63'', Ø19 mm / 0.75'', Ø22 mm / 0.87 |
| Thermowell tip design | Reduced |
| Mounting point | Pipe |
| Measuring point | Pipe |
| Process temperature |
-40…600°C/ -40…1100°F |
| Wetted parts | Austenitic stainless steel (1.4404/316L), Austenitic stainless steel (1.4571/316Ti) |
| Thread connections |
Male: G½, G¾, G1 ½ NPT, ¾ NPT |
| Certificates/Approvals Ex | ATEX, IECEx |
