The OPTITEMP TCA-P64 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P64 can be mounted to pipes, stacks or ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
Depending on selected device configuration
| Product type | Temperature assembly |
| Product family name | OPTITEMP |
| Product positioning | For high temperature applications |
| Product variants | Standard: OPTITEMP TCA-P64 |
| Measurement variables | Temperature |
| Measurement principle | Thermocouple (TC) |
| Measured media | Gases |
| Assembly with thermowell | Yes |
| Thermowell type | Ceramic |
| Sensor mounting | Plug-in |
| Measuring insert replaceable | No |
| Measuring insert type | Non-replaceable TC ceramic measuring insert |
| Tolerance class (according to DIN EN 60584) | 1 |
| Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
| Thermocouple (TC) configuration | 1 x Type K, 1 x Type S, 2 x Type K, 2 x Type S |
| Thermowell diameters | Ø15 mm / 0.6 |
| Thermowell tip design | Straight |
| Mounting point | Pipe |
| Measuring point | Pipe |
| Process temperature |
-40…+1600°C/ -40…+2900°F |
| Wetted parts | Ceramic (C610), Ceramic (C799) |
| Compression fittings |
Male: G1 |
