The OPTITEMP TCA-P20 is a plug-in thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases where a fast response time is required. The OPTITEMP TCA-P20 is designed for process temperatures of up to +600°C / +1100°F. The TC can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The OPTITEMP TCA-P20 is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
Depending on selected device configuration
| Product type | Temperature assembly |
| Product family name | OPTITEMP |
| Product positioning | For standard applications |
| Product variants | Standard: OPTITEMP TCA-P20 |
| Measurement variables | Temperature |
| Measurement principle | Thermocouple (TC) |
| Measured media | Liquids, Gases |
| Assembly with thermowell | Yes |
| Temperature assembly design | DIN-style |
| Thermowell type | Multipart welded |
| Thermowell form (according to DIN 43772) | Form 2 |
| Sensor mounting | Plug-in |
| Measuring insert replaceable | Yes |
| Measuring insert type | Replaceable spring loaded mineral isolated measuring insert OPTITEMP TC 100 |
| Tolerance class (according to DIN EN 60584) | 1 |
| Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
| Thermocouple (TC) configuration | 1 x Type J, 1 x Type K, 2 x Type J, 2 x Type K |
| Thermowell diameters | Ø11 mm / 0.43'', Ø12 mm / 0.47 |
| Thermowell tip design | Reduced |
| Mounting point | Pipe, Tank |
| Measuring point | Pipe, Tank |
| Process temperature |
-40…150°C/ -40…302°F |
| Wetted parts | Austenitic stainless steel (1.4571/316Ti) |
| Compression fittings |
Male: G1/2, G3/4 1/2 NPT |
