Maximum energy efficiency due to EC fan technology and IT-based control
Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans
Optimum adaptability due to dynamic, continuous control of the cold water volume flow
By using high water inlet temperatures, the proportion of indirect free cooling is increased, which in turn reduces operating costs
Modular fan units for a demand-based cooling output (fan replacement without tools, also possible during operation)
Fan modules configurable as n+1 redundancy
Standard 3-phase connection for electrical redundancy
With redundant temperature sensor integrated at the air end as standard
The separation of cooling and enclosure prevents the ingress of water into the server enclosure
A footprint of max. 0.36 m² for all cooling services
Improved heat recovery, thanks to high water return temperatures when using LCP CW glycol variants, for example in combination with a heat pump
Optimum access for maintenance and servicing from the front and rear
Function principle
The hot air is drawn in from the room or hot aisle at the rear of the device and expelled at the front into the cold aisle after cooling. With this product, a raised floor is not necessary.
Material
Enclosure: Sheet steel
Front door: Aluminium, anodised/spray-finished
Colour
Enclosure: RAL 7035
Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005
Options
Direct connection of an additional 16 CMC III sensors possible
Racks in height 2200 mm, additional baffle plate separator including humidity sensor
Monitoring
Monitoring of all system-relevant parameters such as server air intake temperature, server waste air temperature, water inlet/return temperature, water flow, cooling output, fan speed, leakage
Direct connection of the unit via SNMP over Ethernet (2 Ethernet ports for simpler cascading of up to 16 LCPs)
Integration into RiZone OTM Suite (extended measuring and management functions, values can be transferred and visualised)
Note on Model No.
Optimised condensate management also at low water inlet temperatures, available upon request.
TECH IMPRO AUTOMATION SOLUTION SDN BHDIndustrial Automation Supplier Malaysia, Flow Meter Supply Penang, Pressure Transmitter Supplies Butterworth ~ TECH IMPRO AUTOMATION SOLUTION SDN BHD
